| INTERNAL
SPUR & HELICAL GEARS |
SHAPED | SHAVED | GROUND |
| Maximum I.D./O.D. | 48" | 18"-22" | 63" |
| Minimum O.D. | .5" | 7.0" | 8.7" |
| Maximum Face Width | 10" | 15" | 13.7" |
| Diametral Pitch | 2 | 2.5-24 | 1.0-32 |
| Minimum No. Of Teeth | 2 | N/A | NA |
| AGMA Level 2000 / 2015 | 10 / A7 | 10 / A7 | 15 / A2 |
| Tooth Finish | 150-75 | 90-25 | 75-10 |
| Maximum Helix Angle | 45 degrees | - | Variable |
| EXTERNAL SPUR & HELICAL GEARS | HOBBED | SHAVED |
GROUND |
| Maximum O.D. | 60" | 18"-22" |
63" |
| Minimum O.D. | .5" | .5" | .5" |
| Maximum Face Width | 26" | 15" | 40" |
| Diametral Pitch | 1.5-24 | 2.5-24 |
1.5-24 |
| Minimum No. Of Teeth | 2 | 10 | 1 |
| AGMA Level 2000 / 2015 | 11 / A6 | 10 / A7 | 15 / A2 |
| Tooth Finish | 150-75 | 90-25 | 75-10 |
| Maximum Helix Angle | 45 degrees* | 45 degrees* | 45 degrees* |
| *Engineering review required for angle in excess of 45 degrees. | |||
| SPLINES | HOBBED | BROACH |
GROUND |
| Maximum O.D. | 60" | 22" |
63" |
| Minimum O.D. | .5" | .5" | .5" |
| Maximum Part Length | 36" | 6" | 40" |
| Diametral Pitch | 3/6-48/96 | 5/10-74.2 serration |
1.6 & up |
| Minimum No. Of Teeth | 6 | 1 | 1 |
| Spline Class | 4-7 | 4-7 | 4 or better |
| Spline Finish | 150-75 | 120-63 | 75-10 |
|
MACHINING,
ASSEMBLY AND RELATED SERVICES
|
|
|
Machining Center |
Maximum Part Size - 51" cylinder x 43" high |
|
Gun Drilling |
Maximum O.D.- 2", Maximum Length-36" |
| Other Services |
Assembly, Nital Etching, Painting, Shot Peen, Magnaflux, Balancing, Heat Treat Lab, Product Testing and Gear Design. |